Lead-free solder bars

Zhongya(Tianjin) uses the advanced technology of refining and high anti-oxidation, to develop the lead-free solder bar for wave soldering and dip soldering, especially for the automatic assembly line in mass production. This product meets the requirement of the EU RoHS environmental directive.

Advantages

  1. With high anti-oxidation technology, the rate of tin slag is low .We can save the material cost about 6%
  2. Excellent fluidity and wettability, the solder joint is bright and full.
  3. In order to meet the different soldering requirements and adapt to a variety of soldering operation, we provide a wide range of alloy compositions and various types of solder bars for the user to choose.

4-1 Anti-oxidized Lead-free Wave Soldering Bar

Based on the low slag type solder composition and the advanced casting process, The limitation of molten temperature rises to about 400℃ by the addition of special antionxidant. The liquid solder suerface is very bright and like a mirrror. With this solder, bright and beautiful solder joints can be obtained, meanwhile the slag is much lower than the ordinary products, which can reduce the rate of failure in solder Joints and production costs.

4-2 High purity lead-free wave soldering bar

With the high-purity (99.99%) Sn as raw material and strict control of impurity content below 100ppm, the products meet the requirements of RoHS directive.

4-3 Extinction and Anti-oxidated Type Wave Soldering Bar

By extinction technology according to the user's requirements , the solder joints is matt after soldering, We can reduce the reflected light by the solder surface in the testing. It can protect the eyes of inspectors and increase the speed of test to ensure test quality.

4-4 Low-melting-point(79℃-138℃)Solder Bar

Series Melting point Product Status
  Solidus Liquidus Wire Bar
DHL-79※ 79
DHL-130※ 130
DHL-138※ 138 φ1.0-3.0mm
Note:※ means lead-free solder, △ represents the available products, and stands for unsupplied products.

4-5 High Purity Series Soldering Bar

In wave soldering, the composition of solder should be periodically measured in boiler, because the tin content will get low ,meanwhile the content of copper and lead increase. In order to reduce product costs, right amount of high purity series soldering bar or antioxidized alloys should be added when the content of copper or lead is close to the standard.

津ICP備05011517號-1 Copyright © 2010 Cooper ZhongyaSolder,Inc All Rights
海南高频彩票 宜春同城麻将下载 招财鞭炮下载 极速快乐十分免费计划 天津快乐十分前三组遗漏最大 数字货币行情_比特币行情_以太坊行情_莱特币行情_瑞波币行情 熊猫麻将系统规律 11选5视频开奖直播 ag捕鱼线上入口 陕西快乐10分计划 如何打百家乐_Welcome 超级大乐透开奖结果查询 山东11选5走势图-前二走势 以太币最低价格是多少 福彩3d走势图(综合版) 188篮球cba比分直播 陕西快乐10分走势图